HSS End Mills – 3/4 Flute Roughing and Finishing
$12.10 – $67.34
Resharpening: HSS End Mills – 3 & 4 Flute Roughing and Finishing
Title | Range | Discount |
---|---|---|
10 - 19 Pieces | 10 - 19 | 5% $11.50 |
20 - 39 Pieces | 20 - 39 | 10% $10.89 |
40 - 59 Pieces | 40 - 59 | 15% $10.29 |
60 + Pieces | 60 - 9999 | 20% $9.68 |
Description
HSS End Mills – 3 & 4 Flute Roughing and Finishing Resharpening
Diameters: | Lengths: |
.500 1.251 - 1.500 1.501 - 2.000 | To 1" |
You can add Weldon Flats to your bits if needed. You will see the option below or in your shopping cart.
There may be some upcharges if the following items are true:
Excessive Wear | x 1.5 |
Left Hand Helix | x 2 |
Double End | x 1.8 |
Special Diameter | |
Cut Off and Re-Tip | No Charge |
End Only Discount | x .90 |
If you have any questions, please contact us.
Additional information
HSS End Mills Diameters | .500, .501-.625, .626-.750, .751-1.000, 1.001-1.250, 1.251-1.500, 1.501-2.000 |
---|---|
Drill Shaft Lengths | To 1", To 2", To 3", To 4", To 5", to 6" |