Carbide End Mills: 2 Flute, Roughing and Finishing
$12.10 – $51.74
Resharpening Prices: Carbide End Mills: 2 Flute, Roughing and Finishing
| Title | Range | Discount |
|---|---|---|
| 10 - 19 Pieces | 10 - 19 | 5% |
| 20 - 39 Pieces | 20 - 39 | 10% |
| 40 - 59 Pieces | 40 - 59 | 15% |
| 60 + Pieces | 60 - 9999 | 20% |
Description
Carbide End Mills: 2 Flute, Roughing and Finishing Resharpening
Diameters: | Lengths: |
.375 - .500 | To 1" |
You can add Weldon Flats to your bits if needed. You will see the option below or in your shopping cart.
There may be some upcharges if the following items are true:
Excessive Wear | x 1.5 |
Left Hand Helix | x 2 |
Double End | x 1.8 |
Special Diameter | |
Cut Off and Re-Tip | No Charge |
End Only Discount | x .90 |
If you have any questions, please contact us.
Additional information
| Carbide End Mills Diameters | .375-.500, .501-.625, .626-.750, .751-1.000, 1.001-1.250 |
|---|---|
| Drill Shaft Lengths | To 1", To 2", To 3", To 4", To 5", to 6" |
